Customer ServiceCustomer Service
Drilling out set for injector retaining Kit for M6x1 CDI

Drilling out set for injector retaining Kit for M6x1 CDI

The screw holding the injector retaining claw often breaks off, when removing extremely seized injectors. With this tool is in a few steps the remains of the screw centre punched, drilled out and the inner thread cleaned, without removing the valve cover.

Suited for: Kit for M6x1 CDI MB & MB A-class

Content:
- 60418255 Tap M6 x 1.0 x 200 mm
- 20604800 HSS twist drill, 4.8 mm with marking
- 60391820 End milling cutter HSS-E, 8 mm with 3 cutters
- 151.2103 Angular pin spanner 3 mm hex long with spherical head
- 151.2106 Angular pin spanner 6 mm hex long with spherical head
- 151.2110 Angular pin spanner 10 mm hex long with spherical head
- 60391810 Drill-out holder with excenter and guide tube
- 60391801 Drill-out sleeve M6 for guiding the end milling cutter
- 60392001 Drill-out sleeve guide for MB A-class silver tube
Product number60392000