Universal brake line bending tool with bending pliers
240.50 €
excl. Tax, excl. shipping costs
Product number | 61339000 |
---|---|
Availability | Available on order |
- For steel, copper & plastic coated brake lines with 4.75 mm diameter
- The old brake line is measured with the supplied cord, thus the correct length of the new line can be determined and unnecessary waste is avoided.
- Clamping and bending causes no change in the diameter of the line, not even of the soft copper lines
- High quality brake pipe bender which makes neat and comfortable working possible
When replacing the brake lines, the old brake line must be replicated. This is often difficult and time-consuming.
With this tool, the new brake line can be mounted parallel to the existing one to precisely replicate the required bending radii.
Recommended complement: flaring tool 4.75 mm DIN & SAE 6133214.
Content
2x Brake line clamp size 1 "narrow" 61339010
2x Brake line clamp size 2 "wide" 61339020
1x Line bending pliers, length 235 mm 61350000
1x Cord, length 1.5 m, ø 5mm 61339025
When replacing the brake lines, the old brake line must be replicated. This is often difficult and time-consuming.
With this tool, the new brake line can be mounted parallel to the existing one to precisely replicate the required bending radii.
Recommended complement: flaring tool 4.75 mm DIN & SAE 6133214.
Content
2x Brake line clamp size 1 "narrow" 61339010
2x Brake line clamp size 2 "wide" 61339020
1x Line bending pliers, length 235 mm 61350000
1x Cord, length 1.5 m, ø 5mm 61339025
If you are located in North, Central, or South America or Australia, we invite you to visit our international online shop at us.pichler.tools.
You order at: PICHLER Werkzeug GmbH, Pacherstraße 20,
6020 Innsbruck,
Austria