Customer ServiceCustomer Service
Drive shaft retraction nuts

Drive shaft retraction nuts

  • Gewindeschutz bei der Demontage der Gelenkwelle aus der Radnabe und zum getriebeseitigen Lockern der Gelenkwelle
  • Zum Zerlegen und Trennen des oftmals sehr festen Gelenkes
  • Zum Einziehen der sehr passgenauen Gelenkwellen-Verzahnung in die Radnabe bis die Achsmutter angesetzt werden kann
Impact nuts with connection thread M 18 x 1.5 M 22 x 1, M 18 x 1.5, M 22 x 1.5, M 20 x 1, M 24 x 1.5, M 20 x 1.5, M 27 x 1.5, M 20 x 1.25, M 30 x 1.5.

To retract the drive shaft with our slide hammer p/n 6148790/95 or hub extraction flanges p/n 6148725/6148685

Application sample Thread protection during the disassembly of the drive shaft from the wheel hub and for transmission lateral loosening of the drive shaft. For dividing and separating the often very tight joint; the advantage is that there will be an even and horizontal draw. For retracting the precisely fitting drive shaft teeth into the wheel hub until the hub nut can be fitted

Drive shaft impact nut size 0 M16 x 1,5 p/n 610 33 06
Drive shaft impact nut size 1*M18 x 1,5 p/n 610 33 08
Drive shaft impact nut size 2*M20 x 1 p/n 610 33 10
Drive shaft impact nut size 3*M20 x 1,5 p/n 610 33 15
Drive shaft impact nut size 4*M20 x 1,25 p/n 610 33 25
Drive shaft impact nut size 5*M22 x 1 p/n 610 33 33
Drive shaft impact nut size 6*M22 x 1,5 p/n 610 33 35
Drive shaft impact nut size 7*M24 x 1,5 p/n 610 33 37
Drive shaft impact nut size 8*M27 x 1,5 p/n 610 33 38
Drive shaft impact nut size 9*M30 x 1,5 p/n 610 33 47
Retract spindle with nut* p/n 610 32 80
Adapter/ housing with bearing* p/n 610 32 83
Drive shaft impact nut sizes 1 till 9, 9 pcs p/n 610 33 07
Product number61033200
BrandsUniversell, Universell